PRODUCTS
Contact us
:1 Floor, No. 8 Huashan Road, Shanyang Town, Jinshan District, Shanghai
:+86 021-31170068
www.shqhvalve.com
sales@shqhvalve.com
Your location is: Products >> Ball valve >> Two-way Sealing Hard-on-hard Rotary Ball Valve

Two-way Sealing Hard-on-hard Rotary Ball Valve

Product overview

Bidirectional flow hard-to-hard rotary ball valve is a combination of the superior sealing performance of the ball valve and the advantage of the butterfly valve structure research and development, it has a fixed ball valve superior bidirectional pressure, can contain the use of fine particles of liquid pipeline, with the use of high temperature, long life and other practical advantages. Its essence is a combination of butterfly valve and eccentric half ball valve structure function, superior to the installation of half ball valves and fixed ball valves. The sealing principle combines the front sealing of the fixed ball valve with the forced sealing of the eccentric butterfly valve to realize the high and low bidirectional cutting in the pipeline. Stop at pumpIn operation, when the outlet water pressure of pipeline is higher than the inlet water pressure, the use of rotary ball valve can effectively prevent backwater flow, which is also a function of butterfly valve and half-ball valve.It can be use for advanced technology of martensitic stainless steel, austenitic stainless steel, hard alloy and that like by supersonic plasma spray and vacuum protection. The valve will be transformed by its superior value, and it will change the valves of the network, and it will make the general network especially the water system and the water system to enjoy the power of the electricity and gas and the high quality products of the high-end system, and the high quality products.

Product details

Product Features


1. It can shut off reliably not only in the forward pressure, but also in the reverse pressure or the reverse pressure far greater than the positive pressure;
2. It can automatically align the center (self-adaptive) and compensate the wear automatically;


Execution Standard


Design spec:GB/T12237-2007
Face to Face:GB/T12221-2005
Flange end:GB/T9113-2000
Test & check:GB/T13927-2008


Performance Parameter


Nominal diameter:DN50~2000mm
Nominal Pressure:PN1.0~2.5MPa
Applicable mediaWater, sewage, oil, etc
Applicable temperature:0≤200℃
Main materials:WCB、304、 316