PRODUCTS
Contact us
:1 Floor, No. 8 Huashan Road, Shanyang Town, Jinshan District, Shanghai
:+86 021-31170068
www.shqhvalve.com
sales@shqhvalve.com
Your location is: Products >> Ball valve >> Fully Welded Filter Ball Valve

Fully Welded Filter Ball Valve

Product overview

Fully welded filter ball valve has a multi-purpose function of one valve, which not only cuts off the medium, but also has the filtering function, which saves the installation space and the traditional prefilter. The installation and cleaning are simple and convenient. The all welded structure has a longer service life.

Product details

Product Features


1. Integral welded ball valve, no external leakage.
2. The valve seat is composed of PTFE sealing ring and spring, which has strong adaptability to the change of pressure and temperature, and will not produce any leakage in the use range.
3. The machining process of the ball is tracked and detected by the advanced computer detector, and the processing density of the sphere is high.
4. The sealing ring is made of c-ptfe with 20% carbon to ensure no leakage.
5. Compared with similar products of the same specification, the valve body is small, light in weight, beautiful in appearance and long in service life.
6. The valve body, ball and side valve body are all made of slotted steel pipe. The valve rod is sealed with double "O-ring" and has the function of anti blowing out.
7. The filter screen is integrated with the ball, and the ball valve of the filter screen is linked in the pipeline, which has the filtering function, which can replace the filter, play a multi-purpose effect of one valve, save the pipeline installation space and operation cost, and prevent the impurities with diameter greater than 4.5mm from passing through.
8. The filter screen is designed with a slope mouth to ensure that the medium can pass through normally and the valve can work normally when the impurity particles are blocked. The pressure relief valve design can adjust the pressure difference between inside and outside the valve body to improve the safety performance of the valve. At the same time, the screw ball valve can be used to replace the pressure relief valve, which is more time-saving, labor-saving, convenient and flexible.


Execution Standard


Design spec:API 6D、ASMEB 16.34
Pressure-temp:ASME B16.34、API608
Face to Face:ASME B16.10、GB/T 12221
Butt welding end form:ASME B16.25、ASME B31.4/31.8
Test & check:API 598、API 6D、GB/T 13927
Fire resistance test:API 607、API 6FA


Performance Parameter


Nominal diameter:DN65~150mm
Nominal Pressure:PN2.5MPa
Applicable media:Water, steam, oil and other non corrosive media
Applicable temperature:-29≤200℃